Doran 360CE™ Tire Pressure Monitoring System
For Commercial Equipment

Why Tire Pressure Monitors Matter

Avoiding costly downtime on commercial projects due to tire failures has never been more important. Just one tire failure on your equipment can throw an entire project off schedule while adding significant costs and delays to the project that could have been avoided.

In addition, maintaining proper tire pressures on your equipment will help increase the life of your tires, optimize the traction, improve fuel economy and maintain a smooth ride while improving the operator comfort in the cab.

The new Doran 360CE™ tire pressure monitoring system is designed to handle the rigors of the harsh environments at construction sites, mines (surface and underground), quarries and terminals/ports.

Doran 360CE™ Documents

Manual   Product Flyer

How It Works

The Doran 360CE™ tire pressure monitoring system continuously monitors air pressures in your tires by wirelessly transmitting data through RF signals from large bore valve-stem mounted tire pressure sensors to a digital display that is mounted in the cab of the equipment.

Each of the wireless sensors has a unique serial number that is programmed to a specific wheel position on your equipment and allows you to customize the baseline tire pressure that you want to maintain in your tires.

After the sensor locations and baseline pressures are programmed (and have checked in with the monitor) a Green Means Good™ LED light illuminates and “ON” in shown on the LCD display letting the operator know that the tires have the proper amount of air pressure in them.

Warnings/Alerts

FastLeak™: if the pressure in a tire drops by 2.8psi in less than 12 seconds, an audible alarm and red flashing LED light will be triggered. In addition, a FastLeak™ symbol and the specific tire location and pressure are shown on the LCD display. This lets the operator know that there is a problem that needs to be immediately addressed.

Low Pressure: there are two low pressure levels that are built into the monitor. A Level I warning is activated when the pressure in any of the tires drop 12.5% below the recommended baseline tire pressure. A Level II warning is activated when the pressure in any of the tires drop 25% below the recommended baseline tire pressure. In both cases, the audible alarm and red warning light are activated and the specific tire position and pressure are shown on the display.

High Pressure: there is an optional setting to provide a warning if the pressure in the tire increases to more than 25% of the baseline tire pressure.

High Temperature: a “HOT” temperature alarm is activated when the temperature of the sensors reach 248° F which provides additional security against damage to the tires from excessive heat.

Additional Features

Sensor Design and Construction: the Doran 360CE™ large bore sensors (#3603) are built with a unique and durable three-piece seal that provides consistent pressure on the dill pin and minimizes the potential for leaks. A potting material is inserted into each sensor that encapsulates and stabilizes the internal components to withstand vibration and impact on the project site and maximize the durability. In addition, the sensors contain a Lithium-Ion battery that provides long life for signal transmission.

Operator Accountability: The system has the capability to record and store data for up to 32 alarms and the monitor can be locked to prevent inadvertent reprogramming or tampering.

Doran 360CE™ Wireless Sensor Specifications

Doran 360CE™ Tire Pressure Display/Monitor Specifications